SPR Packaging, a member of the Armando Alvarez Group, is opening a $100 million plastic film manufacturing plant on a 103,000-square-foot site in Greenville, Texas. A separate project record lists the construction cost as $50 million, which conflicts with the reported figure.

Alpla is building a 13,000 sq m extrusion blow moulding plant in North Las Vegas, Nevada, with capex of just over $8 million and 51 new positions. Operations are due to begin in spring 2027.

Kenlead is building a packaging film plant in Qantara West in the Suez Canal Economic Zone, Egypt, on a 170,000 square meter site with EGP 4.16 billion of self-financed investment. Operations start with two lines and output is targeted to reach 48,000 to 60,000 tonnes a year by 2027.

Rinsler Pack is investing 840 million rubles in a new plastic packaging production site at its existing facility in Vsevolozhsk, Leningrad region, creating 177 jobs. Annual capacity will be 92 million unprinted bottles, 23 million printed bottles and 237 million container lids.

UFlex has commissioned its first overseas woven polypropylene bags plant in Altamira, Mexico, with an investment of about USD 52 million. The 10-acre facility strengthens its manufacturing presence in the Americas.

ALPLA opened a new packaging plant in Adana, Türkiye, on 14 September 2026, covering about 20,000 square metres for PET preforms and HDPE and PP packaging. It is part of Turkish investments totalling about EUR 30 million.

ALPLA Inc. plans to establish a plastic bottle manufacturing facility in Clark County, Nevada, with $8.01 million in capital investment and 51 near-term jobs. Nevada's governor's office approved $818,718 in tax abatements for the project. The approvals were announced on 14 August 2026.

Axjo Group, a Sweden-based recycled plastic packaging specialist, opened a new 160,600-square-foot plant in Haltom City, Texas, and has begun producing large reels for the wire and cable sector.

Axium Packaging is expanding its Midwest presence with a new 202,000-square-foot facility in the St. Louis area, its third in Missouri. It will initially launch with extrusion blow molding and later add injection stretch blow molding.

Vert opened a 35,000-square-foot pouch and roll stock production site in Longmont, Colorado, built around HP Indigo digital printing, with pouch production starting in July 2026.

Profile Films plans to build a new 97,000-square-foot facility in Grand Rapids, Michigan, next to its existing headquarters and production site, according to MLive. A city board approved a $5.1 million incentive for the project this week.

Al Bayader International signed an agreement with National Industries Park to develop a AED 180 million (about USD 50 million) integrated manufacturing and logistics hub in Dubai, able to produce up to 30,000 tonnes of packaging a year, with construction starting in 2026 and operations targeted for early 2028.

Graham Packaging has proposed a manufacturing facility in about 215,000 square feet of a warehouse in Lee's Summit Commerce Center, with about $33.7 million of machinery and 82 jobs, and has requested a 75% five-year personal property tax abatement.

NatureWorks opened a fully integrated Ingeo biopolymer manufacturing facility in Thailand that will use locally sourced sugarcane as feedstock.

PolyFlex, part of Nefab Group, opened a two-building manufacturing and engineering campus in Wixom, Michigan, for returnable plastic packaging and protective solutions serving automotive and advanced manufacturing clients.

Poly Craft Industries opened a 72,000 sq ft flexible plastic packaging facility in Middletown, New York, costing $27 million, consolidating two Long Island locations and serving as corporate headquarters.

Azuria Water Solutions broke ground on a new $80 million, 72,000-square-foot plant in Batesville, Mississippi, to make Fusible PVC pipe. The facility is expected to create 50 jobs and be completed in early 2027.

Coroplast Group opened a new production site in Schönebeck (Elbe), Germany, for high-performance acrylic adhesive tapes, with about EUR 25 million invested in the first construction phase. About 22 employees are expected by the end of 2026, with long-term potential for more than 100 jobs.

Disruptive Packaging opened a new manufacturing and recycling facility in Mexicali, Mexico, on February 18, 2026, with two production lines producing up to 20 million URTHCOR boxes.

Axium Packaging celebrated the opening of a 227,000-square-foot plastic packaging plant in Brampton, Ontario, its third Ontario location. The facility uses more than 45 packaging equipment lines and 10 plastic resin silos. The article is dated December 16, 2025.

Cairo Company for Packaging Materials (Cobac) plans a new factory with an investment of EGP 2.8 to 3 billion, which will raise its total BOPP film capacity to 67,000 tonnes per year and support exports to Europe and the US.

Gaia Biomaterials established a supply hub in Los Angeles for its compostable, microplastic-free materials, created with distributor Mitsubishi International Corp to shorten lead times for US customers.

Multinova, a maker of bubble wrap and expanded polyethylene and polypropylene plastics, will move its headquarters and plant from Farroupilha to Caxias do Sul, Rio Grande do Sul. Operations at the new 20,000 sq m building are projected to start in January 2027, raising processing capacity by 20% to 30%.

Axium Packaging is investing $45 million to open a new location in Jersey Township, Ohio, with 70 new jobs. The company plans two new production plants to make plastic containers and caps for the personal care industry.

Axium Packaging will invest $45 million in a nearly 300,000-square-foot facility in Jersey Township, Ohio, for expanded tube manufacturing and warehousing. The project will create 70 new jobs and retain over 1,200 existing jobs. Announced 8 October 2025.

Westlake Pipe & Fittings, a division of Westlake Corp., has completed a 190,000-square-foot PVCO pipe plant at its Wichita Falls, Texas site, expanding its North American PVCO pipe capacity. The completion was announced on November 2, 2026, and no investment value was given.

Axium Packaging has opened a 227,000-square-foot manufacturing plant in Brampton, Ontario, its third Ontario location, using more than 45 blow molding and injection molding lines.

PolyFlex Products, part of Sweden's Nefab Group, will invest $8.3 million to open a new manufacturing facility in McMinnville, Warren County, Tennessee, creating 58 jobs. The plant will add material extrusion and reuse of end-of-life industrial packaging.

Canadian plastic packaging producer E. Hofmann Plastics has broken ground on a $43 million production facility in Madisonville, Kentucky, its first US operation. The plant is expected to create 164 jobs and be completed in 2026.

Canada-based E. Hofmann plans its first U.S. facility in Madisonville, Kentucky, with a $43 million investment in a 100,000-square-foot building and equipment. Construction is slated for completion next year, and the project commits to 164 jobs.

Canadian plastics packaging producer E. Hofmann Packaging plans a 100,000-square-foot production facility in Madisonville, Hopkins County, Kentucky, with a $43 million investment that will create 164 jobs. Construction is expected to start in 2025 and finish in 2026.

Turkish company UR-SA signed an investment contract with Egypt's SCZone to build a 35,000 square meter industrial textiles and plastic packaging plant in Qantara West, with $20 million investment and 1,000 expected jobs.

Hon Chuan held a topping-out ceremony for the third phase of its aseptic beverage plant in the Taichung Free Trade Port, costing NT$1.92 billion, with completion expected in Q4 2025 and commercial operation in Q2 2026. Total investment in the zone is set to reach NT$8 billion.

UAE-based Hotpack announced a $100 million manufacturing and distribution facility in Edison, New Jersey, its first North American production base. The 70,000 sq ft plant is planned to create up to 200 jobs and begin operations in June 2025.

Atlantis-Pak, part of Agrokom Group, plans to build a new modern plant for sausage casings in the Rostov region of Russia over four years, with a 10 billion ruble investment, raising output by 45% to 4-5 billion rubles.

Nemera has started building a new 3,000 m² production plant at Ponts-et-Marais in Seine-Maritime, with injection presses and assembly lines. The site is expected to employ 100 people by 2027, with delivery planned for April 2026.

Köksan Group signed a cooperation agreement with Oerlikon Barmag Huitong Engineering for continuous polycondensation technology with 400,000 tons per year capacity at a new plant in Rudong County, Nantong. Production is scheduled to start in mid-2026.

Evertis, part of IMG Group, plans a $100 million plant in Columbia, South Carolina, to make PET multilayer packaging film. The first phase adds 30,000 tons of capacity and more than 100 jobs, with operations expected in Q2 2026, and a second phase would bring total capacity to 60,000 tons by Q2 2028.

Serioplast, an Italian rigid plastic packaging maker, will invest $25,725,000 to occupy a 140,000 sq ft industrial facility in Shenandoah County, Virginia, creating 45 new jobs.

SCHÜTZ and National Plastic Factory Company signed a licence agreement to produce ECOBULK intermediate bulk containers for Saudi Arabia and the GCC. A new production facility will be established near Dammam, with production expected to begin in 2026.

Portuguese packaging manufacturer Intraplás announced a new production plant in Van Wert, Ohio, with a total investment of around €40 million. The plant will use extrusion, thermoforming and printing technology, is scheduled to start operations in summer 2025, and will create more than 50 local jobs.

Petainer Manufacturing USA will open a new site at 315 Joe Frank Porter Drive in Mt. Pleasant, Tennessee, investing $10 million and creating 35 new jobs in the Cherry Glen Industrial Park.

TriMas launched a new 225,000 square foot, highly automated packaging facility in Haining, China, consolidating its Hangzhou and older Haining plants. The site makes dispensing and lotion pumps, caps and closures.

Axium Packaging has opened a $36 million, 130,000-square-foot plastic packaging plant in Archdale, North Carolina, its first in the Carolinas. The plant is about 15 miles southwest of Greensboro and will bring new jobs, though no number is given.

Clearly Clean Products, LLC will build a new manufacturing facility in Greensboro, North Carolina, with a $24.9 million capital investment and at least 80 new jobs. The plant will nearly double its production capacity for recyclable plastic food trays.

Recyclable packaging maker PakTech has launched local manufacturing of multipack beverage can handles in Australia. PakTech and its partners have capacity to make up to 75 million recycled handles annually in Australia.

Packaging maker Venturepak has invested £3m in a new manufacturing facility in Manchester to produce injection-moulded plastic containers for a household brand's ice cream products, previously imported.

Asahi Kasei has broken ground on a lithium-ion battery separator plant in Port Colborne, Ontario, Canada, expected to begin commercial production later. The article is truncated, so the investment value and start date are not stated.

Anduro completed a new 155,000-square-foot manufacturing facility in San Pedro Sula, Honduras, for woven BOPP and flexible plastic packaging. The company says the site more than doubles its capacity.

Packem Umasree, a Brazil-India joint venture, inaugurated its first Indian plant near Ahmedabad on 16 April 2024 to make 100% rPET bottle-based FIBC jumbo bags, with monthly capacity of 600 metric tons and about 700 jobs.