BorgWarner has secured a contract with a major North American OEM to provide an 800-volt secondary integrated drive module and a generator module with dual inverter for the automaker's range extended electric vehicle trucks and large-frame SUV models. Production is set to begin in 2029.

United Utilities' Enterprise has selected DuPont as the preferred supplier for Membrane Bioreactor (MBR) technology for multiple wastewater treatment works in the North West of England, including Eccles, Salford and Wigan. The Wigan site is expected to host the UK's largest MBR.

RFHIC has signed a contract with POSTECH Accelerator Laboratory to supply high-power solid-state power amplifiers for a multi-purpose synchrotron radiation accelerator project. The contract is valued at approximately KRW 18.7 billion and runs from February 11, 2026 through December 31, 2029.

L-PAK launched the first phase of its corrugated cardboard and packaging plant in the Kashira special economic zone in Moscow Oblast on February 11, 2026, with a total investment of 7.7 billion rubles and capacity of 240 million sq m per year.

Maximator GmbH commissioned a new cleanroom in Nordhausen on 11 February 2026, investing approximately EUR 250,000 to manufacture high-pressure gas compression systems for semiconductor customers. Industrial technology specialist item supported planning and implementation.

Potentia Manufacturing Group, with former Edson CEO Adam Cove, acquired Edson including its pump division, marine steering products and custom fabrication facilities. The company will operate as Edson Pumps LLC.

CBS Packaging announced the acquisition of a new 120,000 square foot facility in Walsall, West Midlands, to support a planned plant expansion scheduled for mid-2026.

Menzies Distribution (MDS) will manage nationwide customer deliveries from Weedon Packaging's Manchester facility after a successful trial. Weedon Packaging is part of the Zeus Packaging Group.

Delval Flow Controls was awarded a contract worth Rs 1.22 crore to supply butterfly valves for the Barauni refinery capacity expansion project of Indian Oil Corporation in Bihar. The award date is listed as 11 October 2023.

Everllence will deliver four barrel-type compressor trains to MODEC for a new FPSO vessel for ExxonMobil Guyana's Hammerhead field, with first production expected in 2029. The compressors will be designed and tested at Everllence's facility in Zurich, Switzerland.

Italian can-end maker Easytech Packaging, headquartered in Fisciano, invested in four high-speed rotary liners capable of 1,200 lids per minute to enter the pet food packaging market. Henkel supplied its food-grade sealant for the can end production.

Smiths Group's John Crane received a multi-million-pound order for dry gas seals from a major Middle Eastern energy company, enabling the customer to raise processing capacity from 2.5 to 4 billion standard cubic feet per day. The announcement was made on 11 February 2026.

Angang Steel's Gangjia management unit has awarded a direct procurement contract for booster and pneumatic pumps to Maigesiweite Fluid Engineering Co. The result was announced on 11 February 2026 in Liaoning Province. The contract value is not stated.

RMB Corvest and Alito Fund 2 have partnered to acquire a majority stake in Packaging World, a South African flexible plastic packaging maker based in Pinetown, KwaZulu-Natal. Founder Dean Gianni will retain a meaningful stake.

Gothenburg municipality awarded a SEK 55,000,000 contract for service work and minor contracts on cooling and heat pump systems to six suppliers, including Kyl & Industriteknik i Väst AB, on February 10, 2026.

Trane Technologies, through its Thermo King brand, completed the acquisition of Thermo King Northern, a dealer serving northern UK. The deal closed in early February 2026 and expands Thermo King's UK service network.

dsm-firmenich has agreed to divest its Animal Nutrition & Health business to CVC Capital Partners, retaining a 20% equity stake.

Yuyu Pharma has invested in UK-based freeze-dried pet food brand James & Ella, as part of its strategy in the animal health sector.

AOI broke ground on a 210,000-square-foot manufacturing warehouse expansion in Sugar Land, Texas, as part of a $300 million investment. The project is expected to create more than 500 new jobs over five years for programming automated production lines.

Kangda New Materials (Group) Co., Ltd. announced that its subsidiary Kangda New Materials (Dalian) will invest 646 million yuan to construct a project producing 30,000 tons of polyarylene ether (PAE) annually, along with by-products.

Faymonville Group has reached an agreement to acquire majority shares of Morello, an Italian manufacturer of battery-driven electric heavy load transport vehicles. The acquisition expands Faymonville's range of self-propelled transport solutions for intralogistics.

Arabian Plastic Industrial Company (APICO) signed a memorandum of understanding with K.K. Nag to establish a plant specialized in expanded polypropylene (EPP) products as part of its expansion plans.

Arabian Plastic Industrial Company (APICO) signed a memorandum of understanding with Air International Thermal Systems to explore localizing the manufacturing of ventilation and air conditioning products in Saudi Arabia.

Xinhan New Materials (a subsidiary of Sunlon) plans to raise up to 1 billion yuan to build an annual production of 8,100 tons of high-performance resins and composite materials, and 5,000 tons of monomers, at the Nanjing Jiangbei New Materials Science Park. The project has a total investment of 961 million yuan and a construction period of 36 months.

American Cast Iron Pipe Company (ACIPCO) will expand its facilities and corporate headquarters in Birmingham, Alabama, with a $790 million investment. The project is expected to create 80 new full-time jobs.

Cummins is investing to expand and modernize its Daventry, England facility, including upgrades to engine block machining and assembly lines to enable production of the 95-litre QSK95 engine. A new block line building is expected to open in early 2027, and assembly line upgrades could more than double weekly engine production by 2028.

Axalta Coating Systems and Akzo Nobel N.V. have announced a proposed merger of equals to create a global coatings leader. The companies expect approximately $600 million in cost synergies and 100-200 basis points of revenue synergies.

Italian company Meth Electric Transformers will build a new transformer manufacturing plant in Nagykanizsa, Hungary, with an investment of 5 billion HUF. The project will create 140 new jobs and is supported by a 290 million HUF government grant.

TSMC's board approved an allocation of approximately $45 billion for the construction of new factories and upgrading of existing manufacturing infrastructure to expand semiconductor production capabilities.

RTX received a contract valued at up to $230.56 million from the Naval Air Systems Command for long-lead materials for F135 Lot 20 propulsion systems, covering 138 units for the Marine Corps, Navy, USAF, and international partners.

Richardson Electronics announced a global technology partner agreement with Nxbeam to supply customers with high-power microwave MMICs, ranging from 12.5 to 76 GHz.

American Pasteurization Company has installed a new Hiperbaric 525 high-pressure processing system at its Milwaukee facility to expand HPP capacity for clean-label food and beverage processing.

Astafjord Slakteri has signed an agreement for two EVi gutting machines from JBT Marel, the first installation of their kind in Norway, to be installed at its facility in Gratangen.

Nonwovenn is investing £5 million in the second phase of its transformation programme, focusing on increasing chemical bond production capacity for the oral pouch sector, including a new line.

Bewi combined its EPS raw materials business with The Rock Capital Group, forming a new entity with four facilities and 375,000 metric tons annual capacity. Bewi retains 49% ownership.

Holcim Aggregati Calcestruzzi completed the acquisition of the remaining 75% of Calcestruzzi Erbesi, gaining full control and adding three concrete plants in Lombardy, Italy.

Minth Group Limited announced a joint venture with AISIN Corporation and Toyota Tsusho to establish ATM Automotive in Ontario, Canada, for producing aluminum body frame parts for vehicles. Ownership is 40% Minth Canada, 40% AISIN, and 20% Toyota Tsusho.

Stadler Rail signed a contract with Turkish railway company TCDD Taşımacılık to deliver 35 EURO4001 diesel-electric locomotives, including three years of maintenance. Financial terms were not disclosed.

Ryanair signed a major parts deal with engine maker CFM International, agreeing to buy parts directly from Safran/GE-owned CFM. The deal involves parts worth over $1 billion a year over 15 years, and Ryanair will set up engine repair shops.

AFC Energy signed a Joint Development Agreement with Komatsu Ltd. and Industrial Power Alliance Ltd to design and integrate AFC Energy's ammonia cracking technology with a Komatsu diesel engine. The contract value is approximately US$2 million.

South Korean semiconductor manufacturer STI signed an investment deal with Guangzhou's Baiyun District government to build a power semiconductor manufacturing base. The total investment is around 12.4 billion yuan ($1.79 billion), with a first-phase investment of about 1.6 billion yuan to produce AMB ceramic substrates. Construction starts after mid-February 2026, with production expected by end of 2026.

Sigma Polymer Group, a Sweden-based manufacturer of polymer solutions, has acquired M.O.L. Romgum, a Polish manufacturer of rubber seals and technical rubber products. The deal expands Sigma's sealing offering, particularly in pipe seals for water applications.

Aumovio SE is investing USD 110 million to expand its manufacturing facility in New Braunfels, Texas, adding 65,000 square feet of advanced manufacturing and automated warehouse space. Construction is expected to start in mid-2026, with full operational capacity targeted for August 2027, creating around 100 new jobs.

Velo3D was selected as the first qualified additive manufacturing vendor to support the U.S. Army's Ground Vehicle Systems Center under a Cooperative Research & Development Agreement.

HD Hyundai Asia Holdings Pte. Ltd. formally took over the Doosan Enerbility Vietnam (Doosan Vina) project in the Dung Quat Economic Zone, Quang Ngai, Vietnam. The total investment capital was adjusted to VND 7.54 trillion (~USD 291 million).

Hyosung Heavy Industries signed a contract worth approximately KRW 787 billion to supply 765kV ultra-high-voltage transformers and reactors to a major US transmission system operator.

Boger Concrete Co. and Quandel Concrete, two family-owned ready-mix concrete companies, merged into a single entity, BQ Concrete, under Byler Materials Group.

Nizhnekamskneftekhim, a SIBUR subsidiary, is building a 300,000 tonnes/year metallocene polyethylene unit in Nizhnekamsk, Russia. Commissioning is planned for 2027.

Minth Group, Aisin Corporation and Toyota Tsusho have agreed to form a joint venture named ATM Automotive in Ontario, Canada, to produce aluminum body frame parts for the North American automotive market. Minth Canada will hold 40%, Aisin 40%, and Toyota Tsusho 20%.

Ion Exchange and Company LLC, a subsidiary of Ion Exchange India Ltd, has been awarded a contract by Petroleum Development Oman for a design, build, own, operate, and maintain agreement covering a potable water facility and sewage treatment facility in the South PDO Concession Area. The contract is valued at OMR 73.46 million (approximately ₹1,730 crore) over 20 years.