Polimatiz increased production of composite geomembranes eightfold to 4 million sq m per year at its facility in the Alabuga special economic zone, Tatarstan. Total investment was 286 million rubles, including loans from the Federal Industrial Development Fund and the Tatarstan Investment Venture Fund.

Magnitogorsk Precision Metalworking Plant (MZTM) will receive a 50 million ruble loan from the Chelyabinsk Region Industrial Development Fund to buy new lathes and a boring-milling machine, and expand its production workshop. The total project cost is 94 million rubles, creating 9 jobs, with launch planned for end of 2026.

Tokk Metalpak is investing RUB 1.1 billion (about USD 13 million) to modernise its Krasnodar Krai plant, installing a new varnishing line and building a 14,000 sqm warehouse in the Kurganinsky District, creating 100 jobs. The announcement was dated 9 July 2026.

LIGA-PAK will invest 385 million roubles to modernize its production in the Dinskoy district of Krasnodar Krai, raising production capacity by 30% and creating 25 jobs.

SFT Group will invest 500 million roubles to modernize its corrugated packaging production in the Timashevsk industrial park, aiming to raise output to 110 million square metres per year by 2031.

Kirovsky Kompressor, a subsidiary of PAO Kirovsky Zavod Mayak, is starting construction in April 2026 of a new workshop for welding and galvanic coating. The site will bring component production in-house and is targeted to reach serial compressor output by mid-2027.

Oka Production Company modernized its plant in Pavlovo, Nizhny Novgorod Oblast, raising shut-off valve capacity by 25% to 8,000 units a year. Total investment was about 150 million rubles, including a 90 million ruble federal development fund loan.

United Engine Corporation (ODK) opened a new gas turbine engine compressor production complex at its ODK-Kuznetsov plant in Samara, with an investment of 4.8 billion rubles. The complex doubles the plant's throughput and covers 16,500 square meters.

Arnest Packaging Solutions launched a third production line at its Ulyanovsk plant, a mega-line with capacity of 1 billion aluminum cans per year, lifting total output above 2.5 billion. The expansion investment was 8.4 billion rubles.

GMS group is launching production of API 610 centrifugal and sealed pumps at the Kazancompressormash site in Kazan, Russia, with an investment of 4.35 to 4.5 billion rubles funded from its own resources. The plant plans 300 pumps per year, with first output in June 2026 and full launch by 2028.

Russian manufacturer ADL plans to start building a new 10,000 sq m workshop in Kolomna in 2026, to make electric actuators for shut-off valves and reducers, expanding block heating unit and pumping unit assembly. The investment is 1.5 billion rubles and will create 80 jobs, with launch planned for 2028.

Chelyabinsk company Chelyabinskspetsgrazhdanstroy plans to raise gearbox production for pipeline valves from 3,000 to 8,000 units per month by 2027, with an investment of about 839 million rubles that has already created more than 60 jobs.

SFT Group's corrugated packaging plant in Taganrog, Russia, raised capacity by 10% to 200 million square meters per year after modernizing its main equipment with China's Fosber Group. The investment amount was not disclosed.

Russian plastic packaging maker Ai-Plast signed an agreement with the Rostov region government to expand production of plastic containers for cottage cheese at its Azov plant. Total investment exceeds 400 million rubles and about 20 new jobs are planned.

Arnest Packaging Solutions is launching a third production line and building a 26,000 m² warehouse at its Ulyanovsk aluminum can plant, with investment exceeding 5 billion rubles and the new line due in Q4 2025.

Anima Infinita Flex Novgorod, part of the NEOPOLIS holding, will build a new production and warehouse building at its Veliky Novgorod plant for over 1 billion rubles. The agreement was signed on 18 June, and production launch is planned for April 2026, with 60 jobs.

SFT Group plans to start new production lines at its second corrugated packaging plant Kartonstara-2 in Maikop, Adygea, in May 2025, with annual capacity of up to 150 million square meters.

Rumopak plans to double aerosol can production to 288 million cans a year by building a new production complex with three technology lines in Vyazma, Smolensk region, with an investment of nearly 500 million rubles. The investor has received a construction permit and is preparing to start building, according to the governor.

Arnest Packaging Solutions launched a new aluminium can-lid production line at its Naro-Fominsk plant in Moscow Oblast, with investment above 1.4 billion rubles. The line will let the plant produce more than 7 billion aluminium lids per year.

Arnest Packaging Solutions has started expanding its Ulyanovsk beverage-can plant in the Zavolzhye industrial park, with a third line due by end-2025 and a possible fourth in 2026. The investment will exceed 20 billion rubles and double capacity to 3 billion aluminum cans a year.

Arnest Packaging Solutions plans to complete a modernization of its aluminum lid production in Naro-Fominsk in September 2024. The project costs more than 1.3 billion roubles and will add 1.8 billion CDL lids a year.

Arnest Packaging Solutions plans a third aluminum can line at its new Ulyanovsk plant by end-2025 and possibly a fourth in 2026. Total investment in the plant is expected to exceed 20 billion roubles, with capacity reaching about 3 billion cans a year.

Smolensk governor Vasily Anokhin announced an investment project at the Rudnya container plant to raise tin can production from 30 million to 50 million units per year, with investment exceeding 800 million rubles. Construction of a warehouse and production building has begun, and two new can lines will be installed.

Under an agreement signed with the Chelyabinsk regional governor at Innoprom-2024, ChelyabinskSpecGrazhdanStroy, part of LD group, plans to expand production of pipeline valves with over 1.5 billion rubles of investment, new workshops and more than 250 jobs by 2029.

ADL, the Moscow Oblast government and the Russian Ministry of Industry and Trade signed a special investment contract to build a fourth workshop at ADL's plant in Kolomna. The 750 million ruble project will create 80 jobs and is due by the end of 2024.

Valve maker ANKOS plans to invest 110 million rubles from 2023 to 2026 to modernize its foundry in Krasnokamsk and machining site in Lysva, Perm Krai, and to make new products for the oil and gas sector. The project is expected to create 14 new jobs.

Novgorod group Powerz is completing a 120 million ruble investment project to produce large-diameter three-eccentric valves, with a workshop due by spring 2024 and up to 40 new jobs. The news was reported on 2023-10-19.

The valve project plans a second and third phase, including reconstruction of an empty old building and tripling the floor area of the new building.

Kantek (CANTEC) plans to expand its polymer packaging plant in Stavropol's Energiya industrial park with total investment estimated at 3 billion roubles, in seven production lines, with launch not earlier than 2026 and about 6,000 tonnes per year capacity by 2034.

Russian refrigeration components maker Frigopoint commissioned a billet heating furnace and two 315-ton impact presses for hot forging large ball valves at its Belgorod plant, with a line output of 1000 parts per shift.

Perint, a plastic packaging manufacturer, is building a new 15,000 square meter production and warehouse building on a three-hectare plot in the Sorzha-Staraya industrial zone, Vsevolozhsky district, Leningrad Region. The one billion ruble investment is expected to take about two years and will raise output from 4.5 to 6.5 million units per day.

The Bologovskiy Armature Plant (BAZ Industrial Group) started producing 15 to 50 mm ball valves for taps that it previously bought from other suppliers. It plans to make 600,000 units in 2023.

The Bologovsky brass pipeline valve plant in Tver Oblast bought new machinery in 2022 and is preparing a new galvanic shop with capacity up to 5 million units per year. It plans to reach nearly 8 million units annually and set up three logistics hubs in 2023.

The Satellite plant in Blagoveshchensk, Bashkortostan, which makes pipeline valves, is investing 340 million rubles in a new production workshop, expected to open in September and create 75 jobs and double production capacity.

The Kirov plant Mayak received an approved loan from the Russian Fund for Industrial Development to move its gas compressor production to series output of 120 units per year. The total project budget is 206.1 million rubles and is expected to create 22 jobs.

Planeta-Centr received a preferential loan of 246.8 million rubles from the Fund for Industrial Development to expand production of printed polymer packaging film and wicket bags in the Omsk region. The total modernization budget is 550.6 million rubles.

Soyuzgidravlika in Belgorod modernized and expanded production of gear oil pumps for Russian road and agricultural machinery makers. Capacity rose 35% to 250,000 units per year, and the RUB 118 million investment was partly financed by the Fund for Industrial Development (VEB.RF) with an RUB 80 million loan.

Ball launched a new production line at its Naro-Fominsk plant in the Moscow Region that can make more than 4,000 can lids per minute. The investment exceeds 1.5 billion rubles, creates about 40 jobs, and is expected to add 1.85 billion lids a year by the end of 2022.

Rostec's United Engine Corporation opened a new compressor production complex at ODK-Kuznetsov in Samara, investing 4.8 billion rubles. The new capacity doubles the plant's throughput, and about 500 jobs are expected across two new production lines.

JSC Volga completed a 1.5 billion ruble project that expanded thermomechanical pulp production by 60,000 tons per year and created 240 jobs. The completion date is reported only as recent.

NKBK is adding corrugated production lines at its Novosibirsk plant, including a second single facer and new die-cutting lines, to exceed 18 million square meters per month by the end of 2021.

Acron and Haldor Topsoe completed the revamp of the Ammonia-4 plant at Acron's Novgorod site, which now produces 2,500 metric tonnes per day of ammonia. The overhaul was finished in November 2020 and passed guarantee test runs.

AO Zavod im. Gadzhieva plans to spend 600 million rubles on technical re-equipment and expansion of its blank production in Makhachkala, Dagestan, with 213.18 million rubles spent so far and 570 jobs planned, of which 95 have been created.

Tver regional governor discussed with Shell Neft plans to expand lubricant production at its Torzhok plant, with investment up to 6 billion roubles, output rising to 300 million litres a year, and work starting in 2021 and finishing in 2023.

Arkhbum is upgrading its Ulyanovsk corrugated plant, which makes double and triple wall packaging with monthly output of 16 million square meters. The total project cost is 2.5 billion rubles, with a new plant due to launch in March 2021.

Segezha Packaging launched a third production line at its Salsk plant in Rostov Region, with an investment of 500 million rubles and capacity of 83 million units per year. The announcement was reported on 20 April 2020.

Atlantis-Pak is installing a high-barrier packaging film line with 800 kg/hour capacity at Rostov Civil Aviation Plant No. 412 in Rostov-on-Don, as a temporary measure before a new plant in Yuzhno-Bataisk. Commissioning is planned for October 2020; total investment exceeds 3 billion rubles.

Ilim Gofra installed a Celmacch Chroma Print EVO 1700 printing machine at its Kommunar corrugated plant near St. Petersburg, part of ongoing converting capacity growth. The plant's 2018 investment in development was almost US$10 million.

SFT Group opened the first phase of corrugated board packaging production at the Aleksinskaya paper and board mill in Tula region, after investing over 3.7 billion roubles and creating 200 jobs. A second phase planned to raise capacity to 310 million square metres and add 100 jobs.

NPK NIKA of Shakhty plans to add two production workshops in 2019 and two more in 2020 at its equipment plant, which makes compressors and components for natural gas refueling stations.