NEP Pump won the bid to supply 62 sets of industrial circulating water, cooling, fire and rainwater pumps for ExxonMobil's Huizhou ethylene project in China, with delivery due in the first half of 2023.

Henan Yuda Valve reported supplying more than 500 stainless steel butterfly valves, with Emerson pneumatic actuators, to a caprolactam and hydrogen peroxide chemical project with a total valve value above 500 million RMB. The post is dated 13 August 2022.

Taizhou municipal environmental authority accepted the environmental impact assessment for Zhejiang Danong Industrial's expansion of high-pressure plunger pumps and pump systems at Hengjie Town, Luqiao District, on 19 July 2022.

Flowserve received an order in excess of $15 million from State Nuclear Power Engineering Company for valves and actuators for the AP1000 units at Sanmen and Haiyang under construction in Zhejiang and Shandong provinces. The article's date is uncertain as the text refers to 2014 operation schedules.

KSB, with its joint venture SEC-KSB Nuclear Pumps & Valves, secured a triple-digit million euro order to supply six RSR 750 reactor coolant pumps with high-voltage motors for the Zhangzhou power plant in China, whose units 1 and 2 will each have 1200 MW output.

Parker (Wuxi) Valve Co. has been selected as supplier of high-pressure control valves for the first phase of the 300,000-tonne Liuhua urea project in Gansu Province. The award followed a tender run by the Gansu Tendering Center.

Atlas Copco has agreed to acquire the assets of Shandong Jinggong Pump (Chinco), a Zibo-based maker of liquid ring vacuum pumps and systems, with closing expected in Q4 2022. The purchase price was not disclosed.

TALIS, through its French subsidiary BAYARD SAS, signed a 60/40 joint venture agreement with China's Kc-Val to form TALIS Flow Control (Shanghai) Co. Ltd, which takes over Kc-Val's control valve production. It will be TALIS's first production facility outside Europe and Israel.

LiangGu Valve Group is preparing a fully intelligent special valve factory in Wenzhou Economic and Technological Development Zone with annual output of 100,000 sets and a total investment of 668.78 million yuan. The project has submitted a feasibility report and a land application, and construction is expected to take two years.

Fangzheng Valve Group won a tender for pneumatic valves from CNOOC Development's Shenzhen regional center for CNY 113,000 including VAT. The award was published on 24 May 2022.

Hongde (301163.SZ) board approved using over-raised funds for a 165 million yuan project in Tongzhou, Jiangsu, to build small and medium high-end components. The project is expected to add 15,000 tonnes per year of key parts for wind power and pumps and valves.

Zhejiang Niudun Fluid Technology's new plant in Yongjia, Wenzhou, with total investment above 500 million yuan, entered pile foundation construction and is expected to partly start production by end-2022.

Guangdong GDA Valve Technology began construction on its GDA Digital Intelligent Manufacturing Base in Fusha Town, Zhongshan, for R&D and manufacturing of patented valves for smart heaters and ovens. The total investment is 210 million yuan, with expected annual output value of 400 million yuan.

Azbil completed a new factory building at its Azbil Equipment (Dalian) production base in Dalian, Liaoning, to expand global production, mainly for industrial valves, with full operation scheduled for January 2023.

Youfumi Valve Group is expanding and upgrading its Fuding, Fujian plant to produce 100,000 fluorine-lined pipe valve sets per year. Workshop one is due to be finished by the end of June with production starting in October, and the project adds automated equipment.

Diaphragm valve maker NDV has given Kaiser the EPC contract for its new factory project in Tianjin, China.

Danish pump maker Svanehøj won an order from Jiangsu New Yangzi Shipbuilding for 30 deepwell LNG fuel pumps for 15 dual-fuel 7000 TEU container vessels. Deliveries are scheduled from August 2022 to January 2024.

CNOOC's procurement platform published the tender results on 2022-03-18 for spare parts for boiler control, safety and shut-off valves and pressure-regulating station equipment at Zhongshan Jiaming Power's Phase II and III plant. Shanghai Yixing Fluid Control, Foshan Bashi and Gaotuo Oil & Gas Technology were named winners, with the top winner's price at CNY 764,738.80.

Jiangsu Fujie Equipment Manufacturing broke ground on 2022-03-04 on a Phase II factory and office building in Wujiang District, Suzhou, with about 500 million yuan of investment. After completion it is to produce 6,000 sets of oil and gas wellhead devices and 40,000 valves per year.

Jiangsu Shentong signed a letter of intent with Dewei Valve Casting (Suzhou) and its controlling shareholder HOT EXCESS HOLDINGS to take control of Dewei through a mix of share purchase and cash capital injection. Dewei is a valve supplier to major international oil and gas companies.

Singapore-based Jihua Industrial invested in a project to produce 500,000 valve sets a year in Ningjin County, Dezhou, Shandong, with a total investment of USD 16 million including USD 10 million for new CNC equipment. Annual sales are expected to reach about CNY 200 million.

Shangfa Valve (上阀股份) signed an agreement with the Changsanjiao (Huzhou) cooperation zone for a high-end intelligent industrial fluid control equipment manufacturing project with total investment of 1.2 billion yuan and annual output of 500,000 units. Signing took place on January 8, 2022.

Shanghai Valve Factory signed an agreement with the Yangtze River Delta (Huzhou) Industrial Cooperation Zone for a high-end smart fluid control equipment plant with a total investment of 1.2 billion yuan and annual capacity of up to 500,000 units.

Zhejiang Xiangke Pump Industry Co. plans a technical renovation project to produce 30,000 pumps per year at its site in Luqiao district, Taizhou, with an investment of 2 million yuan in equipment; the environmental approval notice was published December 28, 2021.

Grundfos will spend USD 100 million building a new high-end pump manufacturing plant in Changshu, Jiangsu province, expected to be ready by 2023 and at full capacity by 2026.

BAOYI Group Co., Ltd. was awarded Section 2 of the Yulong Island Refining and Chemical Integration Project (Phase I) by Shandong Yulong Petrochemical Co., Ltd. The article does not state the value of BAOYI's contract.

Xifolong Valve Group won lots 1, 4 and 5 of a valve procurement tender from China National Nuclear Corporation, with a combined award of 41.3072 million yuan. The results were published on November 10, 2021.

Xi'an Aerospace Yuanzheng Fluid Control won an oil transfer valve project from an unnamed Shandong enterprise with a contract value of 51.58 million yuan, announced on 12 November 2021. The company describes it as its largest single valve contract to date.

CNOOC's Shenzhen branch awarded lot one of the electric valve tender for the Enping 15-1 oilfield group development project to Fangzheng Valve Group for CNY 6,248,843.50 including VAT, announced October 28, 2021.

Qingdao Weilong Valve was named winning bidder for the Shenzhen Water Group 2021-2023 secondary water supply tender for stainless steel pressure reducing valves, air release valves and filters, with a bid amount of 106 million yuan, subject to a final contract.

Qingdao Weilong Valve was named winning bidder for the Shenzhen Water Group 2021-2023 secondary water supply tender for stainless steel multifunction pump control valves and check valves, with a bid amount of 145 million yuan, subject to a final contract.

Nantong Longyuan Power Station Valve won a bid from the Northwest Electric Power Design Institute to design and manufacture F91 integral forging shut-off valves for the heating transformation of the Ningdong thermal power unit. The contract was won in October 2021.

SUPCON won PetroChina's annual pneumatic control valve procurement project for 2021 to 2023 on September 22, 2021, after supplying over 200 valves for a Guangdong petrochemical project.

Shenzhen Atco Automation Equipment won a CNY 684,301 procurement award from CNOOC Development's Shenzhen regional center for pneumatic shutoff valves and safety valves. The award was published on 15 September 2021.

Haite Power Co. is building a hydraulic pump and valve production plant in Wenzhou, Zhejiang, with a planned capacity of 400,000 hydraulic pumps and 800,000 hydraulic valves per year. The project is listed with an investment of about 2.091 billion CNY and is in main construction stage.

Yangquan Valve Co. began trial production at phase one of its 20,000-tonne large-diameter gas valve project in the Yangquan High-tech Zone, Shanxi, after equipment installation was completed. Phase one cost 160 million yuan and has already received an order from a Hebei company.

A 20,000-ton new large-diameter gas valve project with a total planned investment of CNY 300 million, part of the relocation and restructuring of Yangquan's valve and pump companies, has entered the equipment installation stage in the Yangquan economic development zone.

Holy Valve won a restriction orifice contract worth 4.9 million yuan from PetroChina Liaohe Oilfield, its largest single restriction orifice order to date, after ranking first among four bidders.

Shanghai Yiyatong Supply Chain won a tender for cryogenic ball valves for the Tangshan LNG receiving terminal project, tendered by Offshore Oil Engineering, with a bid value of EUR 1,990,000 (CIF Tianjin port).

Geko Flow Control Technology (Changzhou) held a groundbreaking ceremony for a new factory in Changzhou's Tianning District. The plant is planned to start in June 2022 with estimated annual output of 120 thousand control valve sets.

Svanehøj has recently signed a pump contract with China's Cosco Dalian Shipyard for two product and chemical tankers similar to the Guangzhou order. The exact signing date was not given.

Guangzhou Shipyard International selected Svanehøj to supply 96 deepwell pumps for four new 49,900 DWT product and chemical tankers being built for White Whale Shipping. It is Svanehøj's largest P&C tanker order since 2005.

Svanehøj won a contract from Guangzhou Shipyard International (GSI) to supply 96 deepwell P&C cargo pumps for four 49,900 DWT MR tankers being built for White Whale Shipping. It is the company's largest single P&C order since 2005.

Fangzheng Valve Group won a tender for low-temperature shut-off valves (6 inch and below, 300LB and below) for the Tangshan LNG project run by Offshore Oil Engineering. The winning bid was CNY 327,747.46 including VAT, announced on 23 April 2021.

Construction is underway on Linuo's high-performance control valve production and R&D project in Ruian, Zhejiang, with total investment of 350 million yuan. Completion is expected in 2022 with annual output value of 1 billion yuan.

Shanghai Valve Factory received special financial support from the Shanghai municipal and Baoshan district governments after passing a Shanghai Science and Technology Little Giant project review. The fund amount was not disclosed in the article.

Germany's Wilo Group signed an agreement with Changzhou high-tech zone officials to build a plant with a total investment of 100 million US dollars for R&D, manufacturing and distribution. The plant is expected to produce over 1 billion yuan in annual sales.

Offshore Oil Engineering (Haiyou Gongcheng) awarded Suzhou Newway Valve a contract worth CNY 5,361,897 to supply low-temperature ball valves for the Tianjin LNG phase II receiving terminal, per the tender result published 10 December 2020.

Nanfeng Co. was named winning bidder for supply of nuclear island relief, control, check and electric heating valves for Tianwan Nuclear Power Station units 7 and 8. The contract is worth 58.7 million yuan and was disclosed on December 1, 2020.

FELUWA Pumpen signed a procurement agreement with China Energy Investment Corporation at the Third China International Expo 2020. The deal was facilitated by its Chinese partner Encore Engineering.