SIG has opened its first aseptic carton pack production plant in Ahmedabad, India, with a €90 million investment. The plant has an initial annual capacity of up to 4 billion packs and is expected to create more than 300 local jobs.

SIG opened its first aseptic carton plant in India, a EUR 90 million facility in Ahmedabad, Gujarat, built in 20 months with initial capacity of up to 4 billion packs a year and more than 300 jobs.

Crown Holdings broke ground on its first greenfield aluminium beverage can plant in India at the IMLC, Unnao, with an investment of ₹2,078.44 crore. The facility is expected to create more than 200 direct jobs.

Wipro Kawasaki Precision Machinery will set up a new hydraulic pump manufacturing plant at Phase V Industrial Area, Harohalli, with an investment of 1,000 crore rupees, according to Karnataka's industry minister. The plant is expected to start within a year and create 1,200 jobs.

Ball Corporation's Indian subsidiary Ball Beverage Packaging India has selected land at the IMLC in Meerut and proposed an investment of ₹2,913 crore for a large aluminium beverage can manufacturing facility. The company has been extended state incentives.

Uniflow Controls is investing ₹50 crore (about $5 million) in a new Industry 4.0 control-valve plant at Ambernath near Mumbai. Annual capacity is to rise from 8,000 to 40,000–50,000 units.

Worth Wellness Private Limited, a wholly owned subsidiary of Worth Peripherals Limited, began commercial production on August 1, 2026 at its new corrugated packaging facility in Indore, Madhya Pradesh. The plant also plans a solar power installation.

Canpac and Krishna Creation will jointly establish a new greenfield rigid paper packaging plant in Ahmedabad, Canpac's tenth Indian manufacturing unit, scheduled to start operations in September 2026.

AGI Greenpac has begun construction of a greenfield aluminium beverage can plant on 34 acres in Hathras, Uttar Pradesh, with an investment of ₹1,000 crore. Operations are expected in H1 2027 with initial output of 1.3 billion cans per year.

Detmold Group has opened a 19,000-square-metre fibre-based packaging manufacturing and warehousing facility in Chatrapati Sambhajinagar (Aurangabad), Maharashtra, consolidating its Indian operations at one site. It has been operational since late June 2026.

FläktGroup announced Project GAGAN, a new production facility in Pune, Maharashtra, with an investment of €5.7 million. Once fully ramped up, the plant will make up to 6,500 units a year, including air handling units, fan wall units, CRAH/CRAC units, coolant distribution units and coils.

Nidec Global Appliance has entered a major construction phase for its compressor plant in Chhatrapati Sambhaji Nagar, Maharashtra, with commercial production scheduled for the final quarter of 2026.

Crown Holdings announced plans for a two-line beverage can manufacturing facility in Northern India, expected to start operations in the second half of 2027 and produce about 2.2 billion cans annually at full capacity, supported by a partnership with United Breweries.

Oliver Valves has opened a 45,000 sq ft manufacturing facility in India that became fully operational on January 2, 2026. The site makes valve components up to 3 tonnes and has a clean room for oxygen-clean valves.

Trelleborg Sealing Solutions India announced a greenfield 50,000 sq m manufacturing, R&D and customer campus in Kaggalahalli, Bengaluru, expected to lift its production capacity by 30% upon completion in 2027.

AGI Greenpac is building a greenfield glass plant in Madhya Pradesh with a Rs 700 crore outlay, expected to raise production capacity by 25% and become operational by March 2027.

SIG's first aseptic carton plant in India, in Ahmedabad, Gujarat, reached full operations in December 2025 after opening in February 2025. The Rs8.8bn ($105m) plant has a capacity of about 4 billion carton packs a year and created around 300 jobs.

Perfectpac Limited plans a second manufacturing unit in Greater Noida with 42,000 MT per annum capacity and an estimated ₹125 crore investment, creating about 700 jobs, after receiving a YEIDA land Letter of Intent.

AS-Schneider India, the Indian subsidiary of Germany-based AS-Schneider, inaugurated a new production facility in Coimbatore, Tamil Nadu, making valves and manifolds for the process industry. The site is integrated into the group's global production network.

NETZSCH Pumps & Systems India inaugurated a new 45,000 square metre manufacturing facility at Verna Industrial Estate in South Goa, India, with a 12,500 square metre production floor.

SKF India announced a $72 million investment in a next-generation digital 'Factory of the Future' manufacturing campus in Pune, Maharashtra, expected to be ready by 2030. The plant will consolidate existing production and add new channels.

SKF India (Industrial) announced a Rs 653 crore investment to establish a next-generation digital 'Factory of the Future' campus in Pune, Maharashtra. The facility is expected to be ready by 2030.

Rechi India, a joint venture of Daikin Air-conditioning India and Taiwan's Rechi Precision, has started construction of a rotary compressor plant in Sri City, India, on 33.10 acres. Phase I involves an investment of Rs 547 crore, with capacity rising from 2 million to 9 million units in the final phase.

Oliver Valves opened a new 45,000 square foot manufacturing facility in India that became fully operational on 2 January 2026, serving as an international manufacturing and supply chain hub; inauguration is set for 12 February 2026.

NETZSCH Pumps & Systems inaugurated a new production facility in Goa, India, at the end of February 2026, more than doubling its previous production capacity in India.

Oliver Valves India Private Limited moved into a new purpose-built 45,000 sq ft manufacturing facility in New Vellanur, Chennai, becoming fully operational on 2 January 2026. The site makes components up to three tonnes and adds in-house painting, non-destructive testing and an oxygen clean room.

Becker India, a vacuum and pneumatic equipment maker, has opened a new assembly unit in Pune, India. Its first product from the site is the VT 4.16 vacuum pump.

Shakti Pumps invested Rs 3 crore in its subsidiary Shakti Energy Solutions to establish a greenfield solar DCR cell and PV module manufacturing plant with 2.20 GW capacity in Pithampur, Madhya Pradesh.

Shah Brothers is constructing a new 87,220 sq ft single-use manufacturing facility in Vadodara, India, with three buildings. It will add capacity for single-use assemblies and fluid handling products for biopharma.

Hawle Valves India signed an MoU with the Tamil Nadu government on 26 November 2025 to invest more than INR 1 billion in a new valve manufacturing facility in Coimbatore for drinking water and wastewater networks.

Fluid Controls Limited has applied to set up a new manufacturing facility on a five-acre site in Karnataka with an investment of INR 900 million. The application was made through the state's Karnataka Udyog Mitra portal.

Piller Global (India), a subsidiary of Piller Blowers & Compressors GmbH, opened a new manufacturing facility in Shirwal, Maharashtra, for mechanical vapour recompression equipment and process-industry systems. The plant spans 9,106.20 square metres, with a first phase of 2,855 square metres.

AGI Greenpac is building a greenfield glass container plant in Madhya Pradesh adding 500 TPD, a 30% increase in total capacity, expected to be operational within 18 months.

Virtuoso Optoelectronics, through subsidiary Virtuoso Compressors, inaugurated a reciprocating compressor manufacturing plant in Nashik, Maharashtra, with annual capacity of 2.8 million units. The plant was developed with technical support from Huayi Compressor and other partners.

FS Compressors India announced a new 50,000 sq. meter manufacturing facility in India with an investment of 100 crore Indian rupees, set to be completed by late 2026. The announcement was made at its 15th anniversary event in Pune.

Ingersoll Rand (India) inaugurated a new Rs 170-crore manufacturing facility in Sanand, Gujarat, making centrifugal and reciprocating compressors, refrigeration dryers and nitrogen generators, with initial capacity of 24,000 units per year.

Oji India Packaging, a subsidiary of Japan's Oji, started up its fifth Indian corrugation plant in Sri City, Andhra Pradesh. The 43,000 square meter plant has an annual capacity of 100 million square meters and employs 130 people, with plans to reach 300.

Astron Packaging of Ahmedabad commissioned a new corrugation facility on a 200,000 sq ft site in Pune, Maharashtra, designed to process 10,000 tonnes of board per month, with more lines planned by October 2025.

Nidec affiliate Embraco announced a compressor manufacturing facility in Chhatrapati Sambhajinagar (Aurangabad), Maharashtra, with over $120 million investment, 6 million units annual capacity and 750 to 1,000 jobs, with operations starting in the second half of 2026.

Virtuoso Optoelectronics Limited has started manufacturing compressors in Nashik, India, according to a Reuters report published July 28, 2025. The article provides few further details.

Embraco, part of Nidec Global Appliance, announced a new compressor factory in Chhatrapati Sambhaji Nagar (Aurangabad), Maharashtra, with 6 million units annual capacity and total investment above $120 million. Operations are set to start in the second half of 2026 and create 750 to 1,000 direct jobs.

Embraco, part of Nidec Global Appliance, announced a 120 million INR (about $12 crore) investment to build a 55,000 square metre compressor and inverter plant in Chhatrapati Sambhajinagar, India, expected to be operational by late 2026.

Nidec will invest $120 million in a new 55,000 square metre factory in Chhatrapati Sambhaji Nagar (Aurangabad), Maharashtra, to make Embraco refrigeration compressors and inverters. Operations are planned to start in the second half of 2026 and create 750 to 1,000 direct jobs.

PG Electroplast is setting up an air conditioning compressor manufacturing plant in Greater Noida, Uttar Pradesh, with estimated value of Rs 350 crore and production scheduled to begin in the second half of 2026. Half of output will serve its own AC units.

GE Vernova T&D India will invest about USD 16 million to add a HVDC and FACTS manufacturing line at its Chennai plant and build a new facility in Noida, India.

Festo India has begun supplying customers from its new manufacturing facility in Bairamangalam, Krishnagiri District, Tamil Nadu, from May 5, 2025. The INR 5.2 billion plant is expected to create 2,000 jobs once fully operational.

Danfoss Power Solutions has begun construction of its manufacturing facility on 44 acres in Talegaon, Pune, its seventh unit in India, estimated at Rs 1,000 crore, to make pumps, motors, cylinders and valves.

PG Electroplast will build an air conditioning compressor manufacturing plant with a capital expenditure of Rs 350 crore. Half of production will supply its in-house AC units and the rest will be sold to external customers, with production slated to begin in H2 2026.

ebm-papst is building a new manufacturing plant in Chennai, India, with a first-phase investment of 36 million euros (INR 340 crore) on a 57,600 m² plot. The plant is expected to be completed by end-2026 and employ around 700 people once operational. Groundbreaking was set for April 4, 2025.

ebm-papst India will invest ₹340 crore to establish its third factory in India at Sunguvarchatram near Chennai, a 14-acre site expected to be operational next year and to create 700 jobs.